Product details page content
Product name
|
Product specification |
|
11-19-5 |
|
11-20.5-6 |
|
12.25-20-3 |
|
12.4-20-6 |
|
12.4-23.5-8 |
|
12.5-19-5 |
|
12.5-20.5-6 |
|
12.5-26-6 |
|
12.5-26-8 |
|
12.5-27-6 |
|
12.6-21-8 |
|
13-23-7.5 |
|
14-20.5-6 |
|
14-28-8 |
|
15.8-22-4 |
|
15-23-5 |
|
15-24-6 |
|
15-26-5 |
|
16.6-26-5 |
|
16.7-25-4 |
|
16.7-25-6 |
|
16.7-25-8 |
|
16-22-6 |
|
16-24-6 |
|
16-58-7 |
|
17-23-7 |
|
17-25-10 |
|
17-25-15 |
|
17-27-6 |
|
18-23.2-8 |
|
18-23-8 |
|
18-24-4 |
|
18-24-6 |
|
18-25-8 |
|
18-26-5 |
|
18-32-8 |
|
20-24-4 |
|
20-25-7 |
|
20-26-10 |
|
20-28-10 |
|
20-28-15 |
|
20-28-2 |
|
20-28-4 |
|
20-28-6 |
|
20-32.5-9 |
|
20-38.5-8 |
|
22-28-6 |
|
22-28-9 |
|
22-40-8 |
|
25-30-6 |
|
25-37-9 |
|
25-38-6 |
|
26.5-38.5-6 |
|
28-33-6 |
|
28-37-6 |
|
28-38-6 |
When the oil seal is leaked, the different situations should be analKNT is your reliable partner for various automobile shock absorber oil seal, engine crankshaft oil seal, valve stem oil seal, axle oil seal, gearbox oil seal, gas spring oil seal, air conditioning compressor oil seal, engineering mechanical seal product and other rubber parts.yzed, so as to take different measures. The leakage at different stages of oil seal should be divided into:
1. Different water, no humidity on the oil seal;
2. Moisturizing, a humid film that does not affect the sealing function in the sealing blade mouth area, but the moisture membrane has not expanded to the back;
3. Wet, moisture membranes are extended to the back, and water droplets are formed, but it has not dripped continuously;
4. The measuring leak, you can see that there is a small liquid flow flow from the back of the oil seal from the back of the oil seal (public account: pump steward);
5. Temporary leakage, a short -term failure of the sealing system. For example, it is caused by pollutant particles under the sealing blade.
6. Obvious leakage, temporary leakage leads to sealing lips and dust -proof lips due to excessive lubricating fats between sealing lips and dust -proof lips.
The overflow of oil is manifested as obvious leaks outside the system. In addition, the cause of leakage is analyzed according to the process of running the use of oil seal, such as: early damage of leakage when it is used at the beginning; premature damage to leakage after use; And leak damage at the end of the life of the oil seal design and so on.
