KNT as china high temperature oil seal manufacturer, oil seals, also known as shaft seals, are used to seal rotating elements, such as shafts or rotating holes, from escaping lubricant, dust, and other contaminants. They are essential components in many industrial and automotive applications, maintaining mechanical integrity and preventing damage or wear.
Features of high performance Oil seal manufacturer oil seal
- Materials: Usually a combination of materials, including elastomers such as nitrile rubber or silicone, and metal springs or garter springs for reinforcement.
- Shape: Usually circular, with a cylindrical outer surface and a lip that contacts the shaft or hole.
- Sizes: Comes in a variety of sizes to accommodate different shaft diameters and depths.
- Configuration: Can be single lip or double lip, depending on application and desired level of protection.
The benefits of oil seals
- Protection: stable High pressure oil seal helps prevent lubricant leaks and protects against contamination, which can cause mechanical wear and damage.
- Longevity: Properly installed oil seals help extend the life of your machinery by preventing leaks and preventing contamination.
- Increased Efficiency: Machinery efficiency can be increased by ensuring lubricants stay in place and reduce friction.
Application of high performance Oil seal manufacturer oil seal
- Automotive: Used in automotive applications such as wheel bearings, drive shafts, and gearboxes to prevent leaks and prevent contamination.
- Industrial: Used in a variety of industrial applications including pumps, gearboxes, and motors to prevent leaks and prevent contamination.
- Agriculture: Used in agricultural equipment such as tractors and combines to prevent spills and prevent contamination.
In conclusion, KNT as a high performance Oil seal manufacturer, stable High-Pressure oil seals are versatile and essential components in many industrial and automotive applications.
They protect against leaks, contamination, and wear and help extend the life and efficiency of machines. When selecting an oil seal, it is important to select the proper size, material, and configuration for a specific application to ensure optimum performance and service life.
상품 상세 페이지 내용
1. 샤프트의 표면조도는 표면조도 RA0.2 ～ 0.63um, RMAX = 0.8 ~ 2.5um로 가공한다.
2. 샤프트의 직경 공차는 GB1801 규정에 따라 H11을 초과하지 않아야 합니다.
3. 떨어지는 각도의 폭은 GB13871-92에서 요구합니다.
4. 표면 경도 : 샤프트의 재질은 탄소강 및 합금강을 사용하는 것이 좋습니다. 권장 경도는 HRC45 이상입니다. 매체가 더러워지면 외부에서 오염 불순물이나 축이 있습니다. HRC50~60이어야 하며 담금질층의 깊이는 0.3mm 이상이어야 합니다.
5. 축 아래쪽 각도는 30도(최대)입니다. 후방 각도에 버, 날카로운 모서리 및 나선형 가공 자국이 없어야 합니다. 역각의 거칠기는 RA ≤ 3.2um입니다.
pay attention
(1) 샤프트의 표면이 거칠고 너무 높으며 기름진 입술 입이 마모되기 쉽고 기름이 새기 쉽습니다.
(2) The burrs, sharp corners, and spiral processing traces at the backward angle are easily scratched by scratching the oil seal and the lip mouth will cause the oil seal to fail.
(3) 샤프트 손상, 샌드 아이, 설치 편향 및 방사형 박동의 손상 또는 감소와 같은 결함을 피하십시오.
