KNT as china high temperature oil seal manufacturer, oil seals, also known as shaft seals, are used to seal rotating elements, such as shafts or rotating holes, from escaping lubricant, dust, and other contaminants. They are essential components in many industrial and automotive applications, maintaining mechanical integrity and preventing damage or wear.
Features of high performance Oil seal manufacturer oil seal
- Materials: Usually a combination of materials, including elastomers such as nitrile rubber or silicone, and metal springs or garter springs for reinforcement.
- Shape: Usually circular, with a cylindrical outer surface and a lip that contacts the shaft or hole.
- Sizes: Comes in a variety of sizes to accommodate different shaft diameters and depths.
- Configuration: Can be single lip or double lip, depending on application and desired level of protection.
The benefits of oil seals
- Protection: stable High pressure oil seal helps prevent lubricant leaks and protects against contamination, which can cause mechanical wear and damage.
- Longevity: Properly installed oil seals help extend the life of your machinery by preventing leaks and preventing contamination.
- Increased Efficiency: Machinery efficiency can be increased by ensuring lubricants stay in place and reduce friction.
Application of high performance Oil seal manufacturer oil seal
- Automotive: Used in automotive applications such as wheel bearings, drive shafts, and gearboxes to prevent leaks and prevent contamination.
- Industrial: Used in a variety of industrial applications including pumps, gearboxes, and motors to prevent leaks and prevent contamination.
- Agriculture: Used in agricultural equipment such as tractors and combines to prevent spills and prevent contamination.
In conclusion, KNT as a high performance Oil seal manufacturer, stable High-Pressure oil seals are versatile and essential components in many industrial and automotive applications.
They protect against leaks, contamination, and wear and help extend the life and efficiency of machines. When selecting an oil seal, it is important to select the proper size, material, and configuration for a specific application to ensure optimum performance and service life.
Содержимое страницы сведений о продукте
1. Шероховатость поверхности вала обрабатывается до шероховатости поверхности RA0,2 ~ 0,63 мкм и RMAX = 0,8 ~ 2,5 мкм.
2. Допуск диаметра вала не должен превышать H11 в соответствии с правилами GB1801.
3. Ширина угла падения требуется в соответствии с GB13871-92.
4. Твердость поверхности: В качестве материала вала целесообразно использовать углеродистую сталь и легированную сталь. Рекомендуемая твердость HRC45 или выше. Когда среда грязная, происходит загрязнение примесями или осью извне. Он должен быть от HRC50 до 60, а глубина закалочного слоя должна быть ≥0,3 мм.
5. Угол наклона оси вниз составляет 30 градусов (максимум). На обратном угле не должно быть заусенцев, острых углов и следов спиральной обработки. Шероховатость заднего угла составляет RA ≦ 3,2 мкм.
pay attention
(1) Поверхность вала шероховатая и слишком высокая, маслянистая губа легко изнашивается и пропускает масло.
(2) The burrs, sharp corners, and spiral processing traces at the backward angle are easily scratched by scratching the oil seal and the lip mouth will cause the oil seal to fail.
(3) Избегайте дефектов, таких как повреждение или уменьшение повреждения вала, шлифовка, смещение при установке и радиальное биение.
